89843 89880 175 89843 uvex 3B chem light Disposable coverall chemical protection Type 3B Certified in acc. with uvex 3B chem light Art. no. 89843 Material polypropylene spunbond laminated with polyethylene film Colour white, yellow Sizes S to 3XL Order unit PC Outer packaging 40 PC per CT Type 3 uvex 3B chem light General features: • light and highly flexible material for high wearer comfort with skin-friendly non-woven material inside Protection features: • ideal for cleaning work • optimal protection thanks to self-adhesive zipper flap Comfort features: • elasticated waistband, elasticated bands on hood, arms and legs for optimal fit • middle finger loops for securing the sleeves Areas of application: • handling low-concentration chemicals • industrial and building cleaning • ship building and automobile manufacture • chemical and pharmaceutical industries • handling paints and varnishes • electronics • handling and dismantling of asbestos • remediation of contaminated sites • livestock breeding and veterinary medicine • waste management The chemicals included in this list are examples only. For a full overview for each individual garment, please consult the technical datasheets. You can also search our Chemical Expert System (see page 183). Chemical CAS no. Class in acc. EN 14325 Class in acc. EN 14325 Acetone 67-64-1 6 of 6 1 of 6 Acetonnitrile 75-05-8 6 of 6 0 of 6 Iron(III) chloride (aq., 45%) 7705-08-0 – 6 of 6 Hydrofluoric acid (aq., 49%) 7664-39-3 6 of 6 6 of 6 Hydrofluoric acid (aq., 71 to 75%) 7664-39-3 – 5 of 6 Hydrofluoric acid in urea (62 to 64%) 7664-39-3 – 2 of 6 Formaldehyde (aq., 10%) 50-00-0 – 6 of 6 Isopropanol 67-63-0 6 of 6 6 of 6 Methanol 67-56-1 6 of 6 6 of 6 Sodium hydroxide, 50% 1310-73-2 6 of 6 6 of 6 Nitric acid, 69.5% 7697-37-2 – 6 of 6 Hydrochloric acid (aq., 37%) 7647-01-0 5 of 6 6 of 6 Sulphuric acid, 96% 7664-93-9 6 of 6 6 of 6 Hydrogen peroxide 7722-84-1 6 of 6 6 of 6 The information provided in the table was obtained in tests conducted under laboratory conditions (at temperatures of 21 ± 2°C). As additional stresses, such as higher temperatures and mechanical influences, are often present in practice, these values serve as a guide only. The information is provided without obligation and is not intended to replace your own suitability tests. Stitched and taped seams. Optimumprotection against penetration by liquid aerosols and solid particles. EN 14126 TYPE 3B EN 14605 TYPE 4B EN 14605 TYPE 5B ISO 13982-1 TYPE 6B EN 13034 EN 1149-5 EN 1073-2 ISO 27065 C3
RkJQdWJsaXNoZXIy MTcxODA1NQ==