-60 % 29 200 We place the highest demands on ourselves For uvex, sustainability is a key focus and has been for over a decade. We are aware of our responsibility and are actively engaging in the current social and technical transformation process. Our mission of protecting people instils in us the obligation to protect the environment. That is why uvex checks, evaluates and optimises all steps along the value creation chain so that we can continue to be at the forefront in the discipline of sustainability. We integrate sustainability holistically into our processes. We have identified four focus areas and set measurable targets throughout the Group, right down to the plant level. The uvex sustainability transformation less CO2 emissions since 2013 (Scope 1 and 2) substances on comprehensive uvex banned hazardous substances list — far more than required by REACH Ecological transformation We strive for climate neutrality and an environmentally friendly footprint throughout the entire value creation chain. Innovation cycle We drive innovation in our products and services through resource efficiency, durability and recyclability. Social responsibility We create social value and bring about a positive change in society and our supply chain through our entrepreneurial thinking and actions. Safeguarding health and the environment We stand for sophisticated pollutant management with the aim of impacting people’s health and the environment as little as possible. The four uvex focus areas external audits in FY 21/22 experience sustainability 2
4 2 1 3 6 5 7 1 7 4 2 1 3 6 7 5 We ensure transparency and provide you with an indicator for the selection of more sustainable PPE We assess the CO2 footprint for an increasing number of products. This makes the sustainability of our products measurable, comparable and improvable. The CO2 symbol on our products provides our customers with a clear and reliable indication of the CO2 product footprint. Emissions transparency of our products We take into account not only the emissions from our own production steps (Scope 1 and 2), but also the emissions from the production of the materials we process (Scope 3). CO₂ product footprint established sustainability For uvex, the long-term sustainability measures that are widely rolled out are a matter of course • 98.4 percent renewable energy sources since 2014 • 97.3 percent of gas consumption is CO2 offset • “Made in uvex”, produced at European sites (< 1,000 km radius from Fuerth) • Packaging made mainly of waste paper • Code of conduct More information can be found in the online folder uvex established sustainability Production 1.81 kg CO2 Material 4.27 kg CO2 Packaging 0.67 kg CO2 Transport 0.42 kg CO2 UVEX-CAGI Ceva, Italy UVEX ARBEITSSCHUTZ & LASERVISION Fuerth, Germany SwedSafe Tyringe, Sweden UVEX SAFETY Gloves Lueneburg, Germany UVEX SAFETY Textiles Ellefeld, Germany UVEX SPORTS Lederdorn, Germany UVEX BARDEJOV Bardejov, Slovakia Example: uvex 1 G2 planet safety shoe Calculation date: 01/2023* 7.2 kg 3
The transfer of knowledge between uvex safety and uvex sports makes our products even safer, more functional and more comfortable — both product divisions benefit mutually from the collaboration. This is evident in our supravision coating technology, for example, which is used equally by both uvex safety and uvex sports. This unique coating ensures maximum antifogging properties on sports goggles and safety spectacles, enabling the wearer to put in their very best performance at work or at play. Further information at: uvex-sports.com uvex products protect people at work, in sport and for leisure. As a partner of international top-level sport, uvex equips over 1000 professional athletes worldwide, e.g. with ski goggles, equestrian riding helmets and cycling helmets. One brand. One mission. uvex safety + uvex sports
Safety Eyewear
by using environmentallyfriendly packaging by using recycled material Product system planet series › Safety Eyewear uvex has developed the protecting planet icon, to help raise awareness of its commitment to achieving increased sustainability. Based on the brand claim, protecting people, our sustainable approach integrates three core interlinked pillars — ecology, economy and social responsibility, that are incorporated throughout the business to improve our sustainability performance. This explains the comprehensive audit, measurement and evaluation management process uvex undertakes along the entire value chain to ensure its products are as sustainable as possible. * Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.4.02 ecoinvent database 3.8. Scope: cradle-to-customer. These CO2 values are valid at the time of calculation and may be subject to change. Films of polyester bags › Up to 70% recycled material from production waste Cartons › Made of over 90% recycled paper Side arms › Hard component made from 65% recycled material › Soft component made from 47.4% recycled material, using waste from the recycling bin Lens › 100% mass-balanced polycarbonate** protecting planet uvex pheos nxt planet Calculation date: 02/2023* 0.11 kg 6
by reducing waste 100 % 9128295 Lens mass-balanced** PC Hard components of side arms from recycled material from post-consumer recycled material (PCR) Soft components of side arms Paper for instruction manuals › 60% reduction Packaging units › increase from 5 to 10 pairs of spectacles reduces packaging material and causes less waste 47.4 % 65 % ** Mass balancing is a bookkeeping method that is used to record and track the mass flows of plastics, for example, along the entire value creation chain. In the manufacturing process, some fossil-based raw materials are replaced by more sustainable alternatives, for example through the use of biomass or recycled raw materials. The mass balancing approach enables manufacturers to verify the use of bio-based raw materials or recyclate within a balance sheet period and to mathematically allocate the bio-based or recycled content to a proportion of the plastics produced, resulting in a material with a significantly lower CO2 footprint. However, the exact proportion of bio-based or recycled material in the end product can no longer be precisely determined. At uvex, mass-balanced material is used in the lenses of the planet models, enabling a significant reduction in their CO2 footprint. By purchasing mass-balanced polycarbonate, uvex is helping to replace fossil-based raw materials with bio-based materials. 7
The uvex brand is our responsibility We have been producing and selling high-quality products for the protection of people in sport, leisure and work for over 90 years. And if you want to protect people, you have to take responsibility. It is precisely from this mission that our obligation derives to act in a sustainable, social and socially-responsible manner. In the PPE sector, the use of recycled or bio-based materials must not impair the protective properties under any circumstances — this makes the search for and use of sustainable materials a major challenge. Nevertheless, we have succeeded in qualifying suitable recycled and bio-based (and, in some cases, mass-balanced**) materials, which can be processed and used in the manufacture of some of our top sellers: Sustainability without compromising quality experience sustainability Conserving resources, reducing waste Instead of disposing of all parts of the safety eyewear, we make it easy to replace the lens so that the frame can be used for longer. This enables us to save material and energy in production and contributes to sustainability and waste prevention. Material and weight savings by using replacement lenses: Expanded range of replacement lenses Lenses mass-balanced PC made from bio-based raw materials Side arms recycled or bio-based material and PCR1 Frame recycled PET bottles or bio-based material3 as well as PCR1 and PIR2 Coupling parts and headband hooks recycled PET bottles Soft face seal recycled granulate (PIR2) and PCR1 Headband recycled yarn, bio-based material3 (headband slider) and The proportion of recycled, biobased material varies from model to model, but always lies between up to This enables CO2 savings of for spectacles, up to for goggles, up to 1 PCR = post-consumer recycling (e.g. yoghurt pots) 2 PIR = post-industrial recycling (e.g. production waste) 3 Castor oil 13.0 % 100 % 29.0 % 71.0 % -44 % -82 % uvex safety eyewear 8
uvex ultrasonic planet 9302290 uvex megasonic planet 9320295 uvex i-guard planet 9143296 uvex i-guard+ planet 9143297 uvex sportstyle planet 9193395 uvex pheos nxt planet 9128295 uvex i-lite planet 9143295 uvex super OTG planet 9169295 Information: Values are rounded to two decimal places • Transport calculation: Transport of the product incl. sales surcharge of the product group • Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.4.02 ecoinvent database 3.8, except uvex pure-fit safety spectacles: IPPC 2013. The specified CO2 values are valid at the time of calculation and may be subject to change. • Scope: cradle-to-customer • Unit: kg CO2 eq Emissions transparency of our products We take into account not only the emissions from our own production steps (Scope 1 and 2), but also the emissions from the production of the materials we use (Scope 3). The carbon footprint is the result of an emissions calculation of all greenhouse gases released by an activity. The effect that various greenhouse gases have on the climate is expressed in CO2 equivalents (kg CO2 eq) Calculation date: 01/2023* 0.13 kg Calculation date: 01/2023* 0.11 kg Calculation date: 02/2023* 0.12 kg Calculation date: 02/2023* 0.11 kg Calculation date: 01/2023* 0.18 kg Calculation date: 04/2023* 0.21 kg Calculation date: 02/2023* 0.12 kg Calculation date: 01/2023* 0.19 kg 9
Innovative safety eyewear — made in Germany uvex safety eyewear centre of expertise Innovative safety eyewear for the highest quality standards In Fürth, Bavaria, uvex develops and produces first-class and highly functional safety spectacles, goggles, prescription spectacles and laser protection eyewear. The uvex plant is certified in accordance with ISO 9001:2015 and ISO 50001:2011, and relies on state-of-the-art technology and strategic partnerships to develop future-oriented technologies and products. uvex safety eyewear greatly exceeds all requirements of the applicable standards. Because good is not good enough for us. Perfection as standard from uvex All safety eyewear is comprehensively tested at the uvex test centre: As well as satisfying national and international safety standards, every item of safety eyewear also meets the exacting uvex standard in terms of functionality, ergonomics, durability and wearer comfort. Innovative coating technologies are one of uvex’s core competencies. The improved uvex supravision excellence universal coating exceeds the anti-fogging requirements of the EN 168 standard four times over. New uvex product and innovation highlights The product highlight: With its great design, lightness and fit, the uvex pheos nxt is the perfect addition to our pheos family. The innovation highlight: With uvex IR-ex, uvex is offering safety eyewear with IR protection filters for the first time. The special feature of the filter is that it meets the requirements of multiple standards. 10
Perfect vision for maximum safety uvex coating expertise Innovative manufacturing process Conventional safety eyewear combines anti-fogging properties and scratch-resistance on both sides of the lens: This reduces the scratch-resistance and the anti-fogging effect is lessened by regular cleaning. Unlike conventional processes, the unique uvex process applies different coatings to either side of the lens. Perfect vision whatever the situation The outside of uvex lenses has an extremely scratch- resistant, chemical-resistant and easy-to-clean coating, while the inside is coated with a highly durable anti-fog effect — for perfect vision and maximum safety. Lenses are also available with an extremely scratch- resistant or anti-fog coating on both sides — depending on the working environment. uvex supravision excellence — next level performance uvex has further improved its proven uvex supravision excellence coating technology once again: All lenses now offer twice the performance in terms of anti-fogging time, exceeding the requirements of the EN 168 standard four times over. It all comes down to the coating Looking through lenses that are fogged up, scratched or dirty significantly increases the risk of accidents during the working day. uvex has been synonymous with innovative coating technologies for decades: In our centre of expertise in Fürth, we develop and produce scratch-resistant and anti-fog lenses for a multitude of applications. The innovative coating technology makes uvex safety eyewear a reliable companion during day-to-day work — in a variety of applications. 11
35% LF 25% LF 15% LF -10°C -5°C uvex supravision plus uvex supravision excellence Find your ideal lens coating 1. Select the temperature which best represents your working environment on the horizontal temperature axis. 2. Define the air humidity of your environment in percentage terms and find the value on the diagonal axis. 3. Determine the level of dirt on the vertical axis. 4. Connect these three points to form a triangle. 5. The part of the triangle with the largest area indicates the lens coating most suited for your workplace. dry 0% RH cold -20 °C • Unique dual-action permanent anti-fog coating on the interior of the lens and a scratchresistant hard coating on the exterior. This allows each coating to perform at maximum efficiency. • extremely scratch-resistant and chemical-resistant on the outside of the lens with non-stick, easy to clean technology • long lasting anti-fog performance on the inside • anti-fog performance will not diminish even after repeated cleaning • suitable for a wide range of workplaces • long lasting anti-fog performance and scratch-resistance on both sides • anti-fog performance will not diminish even after repeated cleaning • suitable for environments where there is high humidity and/or frequent temperature fluctuations Now with twice the anti- fog performance Interior Performance Anti-fog Scratch-resistance Exterior Interior Performance Anti-fog Scratch-resistance Exterior 12
100% LF 70% LF 60% LF 70% 60% 40% 30% 50% 20% 10% 0% 100% 80% 90% +35°C +12°C +6°C +23°C uvex supravision sapphire Coating technology Core Coatings dirty clean wet 100% RH hot +35 °C RH = air humidity • extremely scratch-resistant and chemical-resistant on both sides • non-stick technology making eyewear easier to clean • for challenging, dirty and/or dusty workplaces Interior Performance Anti-fog Scratch-resistance Exterior 13
Coating technology Special Coatings uvex supravision extreme Interior: • durable, permanent anti-fog performance • coating forms a thin veil of water without impairing vision Exterior: • extremely scratch-resistant, chemical- resistant and easy to clean Areas of application: • prolonged exposure to high risk of fogging and dirt Interior Performance Anti-fog Scratch-resistance Exterior uvex supravision clean Specifically developed for the health care sector. Lenses with uvex supravision clean are autoclavable. Interior: • lasting anti-fog performance • anti-fog performance lasts a minimum of 20 autoclave cycles Exterior: • extremely scratch-resistant, chemical- resistant and easy to clean Areas of application: • dry, clean environments Interior Performance Anti-fog Scratch-resistance Exterior uvex supravision infradur plus Specifically developed for welding applications. Lasting anti-fog performance on the inside, extremely scratch-resistant outside and minimises burns from welding sparks. Areas of application: • suitable for dirty, welding environments with a high possibility of fogging Interior Performance Anti-fog Scratch-resistance Exterior uvex supravision infradur Specifically developed for welding applications. Extremely high scratch-resistance on both sides. Minimises burns from welding sparks. Areas of application: • suitable for very dirty, dry welding applications where there is minimal risk of fogging Interior Performance Anti-fog Scratch-resistance Exterior uvex supravision variomatic Self-tinting coating that darkens when exposed to UV. Benefits from highly effective anti-fog performance inside, extremely scratch-resistant on the outside. Self-tinting coating: • automatically darkens within 10 sec. and lightens within 30 sec. Areas of application: • frequent moves between indoor and outdoor environments or light and dark workspaces Interior Performance Anti-fog Scratch-resistance Exterior uvex supravision ETC (extreme temperature conditions) Interior and exterior: • durable, permanent anti-fog performance • coating forms a thin veil of water in humid environments without impairing vision Areas of application: • workplaces with high humidity and/or frequent temperature fluctuations Interior Performance Anti-fog Scratch-resistance Exterior 14
Entry into force and transition period In May 2023, EN ISO 16321 was formally published in the Official Journal of the European Union as a harmonised standard and replacement for EN 166. The legal introduction of the new standard will take effect in November 2024. From this date, products may only be tested and certified by official bodies in accordance with the new EN ISO 16321 standard. However, existing certificates based on EN 166 will remain valid until their respective official expiry dates, but for a maximum of five years. This means that products that are certified or recertified in accordance with EN 166 by 31 October 2024 may be labelled and placed on the market in accordance with EN 166 until 31 October 2029. During this transition period, safety eyewear in accordance with both EN 166 and EN ISO 16321 will be available on the market. For dealers, by contrast, there is no end date by which they must have sold their EN 166-certified products! Scope and background The ISO was established primarily for updating and adapting already defined tests and test methods to match the current technological standards. It is also designed to achieve, where possible, the global harmonisation of the various PPE standards in force in different regions of the world. When defining the requirements and test methods, ISO has taken all international standards currently in force (e.g.AS/NZS, ANSI etc.) into account and has incorporated elements of them into the unified and harmonised standard ISO 16321. However, member countries are free to choose whether to apply the new ISO standard or to maintain their existing, currently applicable national standards. In the future, this will allow for greater consistency in international product markings and universal minimum standards. In the European Union and the United Kingdom, EN ISO 16321 will replace the current standard EN 166 when it comes into force. Other international PPE markets may follow in the future. EN ISO 16321 — The most important changes at a glance: • EN ISO 16321 includes EN ISO 16321-1 (general requirements; UV, sunglare and IR filters), EN ISO 163212 (welding protection filters) and EN ISO 16321-3 (mesh visors). • The markings for all safety eyewear and visors will be updated. As a result, new certificates will be required for all affected products. • New test heads and coverage areas have been defined, and certification of different head sizes (S, M, L) is now also permitted. • The mechanical strength for goggles and face protection will be reduced to 80 m/s and 120 m/s (previously 120 m/s and 190 m/s). • Additional, optional tests for e.g. chemical resistance, liquid flows and electrostatic discharges are made possible. • Various tests and markings will be limited to certain product areas, e.g. it will only be possible to use marking 9 (protection against molten metals) for visors. The new standard for safety eyewear EN ISO 16321 Frame marking Lens marking Unpacking the new standard and what it means for your safety eyewear For more than 20 years, the EN 166 standard has defined all of the requirements and standards for safety eyewear within the European Union and the United Kingdom. EN 166 is now being replaced by EN ISO 16321. The new standard contains a range of international standards that will entail some significant changes to product requirements and test methods. 15
2C MM/YYYY - 1,2 W1 FT KN W 166 34 FT Markings in accordance with EN 166 Filter 2 UV protection filter (EN 170) 2C/3 UV protection filter with colour recognition (EN 170) 4 IR protection filter (EN 171) 4C IR protection filter with colour recognition (EN 171) 5 Sunglare filter for industrial use (EN 172) 6 Sunglare filter with infrared requirement (EN 172) Tinting levels Marking Light transmittance Available uvex tints 1,2 74.4–100% AR, clear, amber 1,4 58.1–80% CBR65 1,7 43.2–58.1% Silver mirror 53% 2,5 17.8–29.1% CBR23, grey 23% 3,1 8–17.8% Grey 12%, silver mirror 12%, polavision 1,7 43.2–58.1% Welding shade level 1,7 3 8.5–17.8% Welding shade level 3 5 1.2–3.2% Welding shade level 5 1,7 43.2–58.1% Infrared protection IR-ex level 1,7 3 8.5–17.8% Infrared protection IR-ex level 3 5 1.2–3.2% Infrared protection IR-ex level 5 Mechanical strength None Minimum robustness (filters only) S Increased robustness F Low-energy impact (45 m/s or 162 km/h) B Medium-energy impact (120 m/s or 432 km/h) A High-energy impact (190 m/s or 684 km/h) T Tested under extreme temperatures (-5°C/+55°C) Markings on frames in accordance with EN 166 Additional markings* None General use 3 Protection against liquids (drops and splashes) 4 Protection against large dust particles with a grain size of > 5 µm 5 Protection against gases, vapours, smoke, fumes and fine dust particles with a grain size of < 5 µm 8 Protection against short-circuit electric arcs (visors only) 9 Protection against molten metal and hot solids Mechanical strength None Minimum robustness (filters only) S Increased robustness F Low-energy impact (45 m/s or 162 km/h) B Medium-energy impact (120 m/s or 432 km/h) A High-energy impact (190 m/s or 684 km/h) T Tested under extreme temperatures (-5°C/+55°C) Markings on lenses in accordance with EN 166 EN standard Mechanical strength Manufacturer's identification mark Additional marking Conformity mark Tinting level Filter Production date All uvex eyewear conforms to optical class 1 Mechanical strength Manufacturer's identification mark Additional marking Conformity mark K Surface resistance to damage by small particles in accordance with EN 168 (scratch resistance) N Resistance to fogging in accordance with EN 168 8 Protection against short-circuit electric arcs 9 Protection against molten metal and hot solids Additional markings* 16
16321 W 34 CT 1-M UL MM/JJJJ W 1,2 CT 1 KN Filter U UV protection filter G Sunglare filter W Welding protection filter R/RR Infrared protection filter + L Signal light detection (optional, can be additionally certified for each filter) Markings in accordance with EN ISO 16321 Tinting levels Marking Light transmittance Available uvex tints U1,2 74.4–100% AR, clear, amber G1 43.2–80% CBR65, silver mirror 53% G2 17.8–43.2% CBR23, grey 23% G3 8–17.8% Grey 12%, silver mirror 12%, polavision W1,7 43.2–58.1% Welding shade level 1,7 W3 8.5–17.8% Welding shade level 3 W5 1.2–3.2% Welding shade level 5 RL1,7 43.2–58.1% Infrared protection IR-ex level 1,7 RL3 8.5–17.8% Infrared protection IR-ex level 3 RL5 1.2–3.2% Infrared protection IR-ex level 5 Additional markings* K Surface resistance to damage by small particles in accordance with EN ISO 16321 (scratch resistance) N Resistance to fogging in accordance with EN ISO 16321 7 Protection against radiant heat 9 Protection against molten metal and hot solids CH Chemical resistance Mechanical strength None Drop ball test in accordance with EN ISO 16321 (basic requirement) C Low-energy impact (45 m/s or 162 km/h) D Medium-energy impact (80 m/s or 288 km/h) E High-energy impact (120 m/s or 432 km/h) HM* High-mass impact (500 g steel projectile, drop height 1.27 m) T* Tested under extreme temperatures (-5°C/+55°C) Markings on frames in accordance with EN ISO 16321 * Optional ** 1-M is the standard. If only 1-M has been tested, this does not have to be marked on the frame or on the packaging. Mechanical strength None Drop ball test in accordance with EN ISO 16321 (basic requirement) C Low-energy impact (45 m/s or 162 km/h) D Medium-energy impact (80 m/s or 288 km/h) E High-energy impact (120 m/s or 432 km/h) HM* High-mass impact (500 g steel projectile, drop height 1.27 m) T* Tested under extreme temperatures (-5°C/+55°C) Markings on lenses in accordance with EN ISO 16321 Additional markings* 3 Protection against liquids (drops and splashes) 4 Protection against large dust particles with a grain size of > 5 µm 5 Protection against gases, vapours, smoke, fumes and fine dust particles with a grain size of < 5 µm 6 Protection against high-pressure liquid flows 7 Protection against radiant heat (visors only) 8 Protection against short-circuit electric arcs (visors only) 9 Protection against molten metal and hot solids (visors only) CH Chemical resistance Head sizes 1-S Small, European test head 1-M** Medium, European test head (standard) 1-L Large, European test head 2-S Small, Asian test head 2-M Medium, Asian test head 2-L Large, Asian test head Manufacturer's identification mark Head size** Standard Additional marking Conformity mark Mechanical strength Tinting level Filter Manufacturer's identification mark Production date All uvex eyewear conforms to optical class 1 Mechanical strength Additional marking Conformity mark 17
Lens tinting A lens solution for every light environment AMBER Protection: UV400 Marking: 2(C)-1.2 Transmission: approx. 88% Protection against mechanical hazards without glare, with contrast enhancement AR (anti-reflective) Protection: UV400 Marking: 2(C)-1.2 Transmission: approx. 96.5% Optimum anti-reflective protection with high degree of light transmission CLEAR Protection: UV400 Marking: 2(C)-1.2 Transmission: approx. 91% Protection against mechanical hazards without glare 74 – 100% transmission 58 – 80% transmission tint with glare protection not necessary Standards: EN 166, EN 170; EN ISO 16321, UV protection filter Standards: EN 166, EN 170; EN ISO 16321, UV protection filter Standards: EN 166, EN 170; EN ISO 16321, UV protection filter CBR65 Protection: UV400 Marking: 5-1.4 Transmission: approx. 65% Protection offering relaxing, focused vision Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter 18
Lens tinting POLAVISION Protection: UV400 Marking: 5-3.1 Transmission: approx. 14% Reduction of irritating surface reflection by filtering scattered light CBR23 Protection: UV400 Marking: 5-2.5 Transmission: approx. 23% Protection against natural glare with signal colour recognition and increased contrast effect GREY 12% Protection: UV400 Marking: 5-3.1 Transmission: approx. 12% Protection against natural glare with signal colour recognition GREY 23% Protection: UV400 Marking: 5-2.5 Transmission: approx. 23% Protection against natural glare with signal colour recognition 8 – 18% transmission 18 – 29% transmission 43 – 58% transmission tint with glare protection recommended tint with contrast adjustment recommended tint with contrast adjustment not necessary Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter SILVER MIRROR 12% Protection: UV400 Marking: 5-3.1 Transmission: approx. 12% Protection from both highly artificial light and natural glare conditions Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter SILVER MIRROR 53% Protection: UV400 Marking: 5-1.7 Transmission: approx. 53% Protection in changing light conditions Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter Standards: EN 166, EN 172; EN ISO 16321, Sunglare filter 19
uvex UV400 400 350 300 250 UVB UVA HEV uvex UV400 100% UV protection. 100% safety. 100% uvex. “The reasons why the WHO recommends UV400 protection are clear. The outer tissues of the eye, cornea and lens fully absorb UV light. While UVB light primarily damages the genetic material, UVA rays pene- trate deeper, cause thermal damage and magnify the effects of UVB light.” Univ.-Prof. Dr. rer. nat. Olaf Strauß uvex UV400 offers complete protection against UVA and UVB radiation as well as high-energy visible light (HEV) up to a wavelength 400 nm. For the eye and surrounding skin 100% protection against dangerous UVA and UVB radiation Radiation in nm uvex UV400 — included in all uvex safety eyewear Whether you choose clear or tinted lenses, all uvex safety spectacles are equipped with uvex UV400 effective UV protection as standard — as well as pleasant wearer comfort, a sporty design and top-quality lens coatings. Even without sun, UV rays can still put strain on the eye When working outdoors, your eyes are regularly exposed to harmful UV radiation — even when it is cloudy. The result: using insufficient protection risks may cause dangerous long-term damage such as corneal injury, cataracts and blindness. 100% safety. uvex safety eyewear, uvex UV400 not only filters 100% of UVA rays (20% still passes through 380 nm lenses), it also completely minimises temperature-induced cell changes — a factor which increases tenfold in the percentage of total cell damage in the range from 380 to 400 nm. In addition, the dangerous, damaging blue light content (HEV), which is also harmful to the retina, is reduced by 15%. The EN166/170 standard requires safety eyewear to provide UV protection up to 380 nm. The latest scientific findings show that this is not enough. The WHO (World Health Organization) recommends UV protection up to 400 nm. 20
Contrast Bluelight reduction Relaxed vision 65 % transmission 23 % transmission 9193064 9183223 9309064 9128064 9183064 9128223 9169164 9193223 9198223 9198064 9320223 90 80 70 60 50 40 30 20 10 0 380 460 540 620 700 420 500 580 660 740 780 CBR65 CBR23 uvex CBR65 ∙ uvex CBR23 Fatigue-free, comfortable vision Contrast enhancement Better contrast for clearer vision, helping to reduce strain on the eyes — even in diffused light. Blue light reduction Blue light is reduced by up to 50 or 95%. Relaxed vision Ideal for high-concentration work; the eyes get less tired even when working for longer periods. Slight tint Ideal for use both indoors and outdoors. Ideal for working in bright LED lights, for example. Optimal protection against glare Especially for working outdoors. Preventive protection against blue light The properties of the uvex CBR65 and CBR23 lens technology are significantly different to those of uvex UV400. They filter high-energy visible light (HEV)—which causes particular strain on the retina in the range from 380 nm to 450 nm— by up to 50 or 95%. Transmission in % visible wavelength spectrum in nm 65% light transmission 50% blue light reduction 95% blue light reduction UV radiation IR radiation Strain on the eye caused by blue light has increased enormously as a result of intensive use of electronic devices (PCs, smartphones, tablets, LED TVs etc.) and the switch from incandescent light bulbs to LEDs. The short-term effects of this include eye strain, headaches and poor concentration, while in the long term there is an increased risk of age-related macular degeneration. uvex CBR65 and CBR23 reliably protect the eye against health risks without disrupting the body’s internal clock. 450 nm 21
grip. fit. vented. uvex pheos nxt The uvex pheos nxt combines a classic sporty design with comfort, lightness and optimum protection. The special design of the arms is not just visually impressive: the directional structure ensures extremely good grip — even for demanding work. Numerous cut-outs in the side arms improve air circulation and make the spectacles lightweight without sacrificing strength. In addition, the large panoramic lens offers a wide, distortion-free field of vision to provide a clear, comfortable view. The uvex pheos nxt is an appealing all-rounder and ideal companion for a wide range of working conditions. The proven uvex supravision coating technology (with UV400 protection) offers a distortion-free field of view at all times. The grip structure guarantees a secure fit even during demanding work. The innovative side arm design allows maximum air circulation for climate-optimised wearer comfort. Lightweight design for an even more comfortable fit. 22
9128265 9128295 9128064 9128223 Safety Spectacles uvex pheos nxt ∙ uvex pheos nxt planet uvex pheos nxt uvex pheos nxt planet Art. no. 9128265 9128295 9128064 9128223 Version uvex supravision excellence uvex supravision excellence uvex supravision excellence uvex supravision excellence sunglare filter sunglare filter Standard EN 166, EN 170 EN 166, EN 170 EN 166, EN 172 EN 166, EN 172 Frame blue, anthracite anthracite, jade white, black white, black W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC clear (mass balanced) PC CBR65 PC CBR23 UV400 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE 5-1,4 W1 FTKN CE 5-2,5 W 1 FT KN CE Weight 25 g 25 g 25 g 25 g Order quantity multiples 10 PC 10 PC 10 PC 10 PC uvex pheos nxt • Classic sporty, lightweight safety spectacle with innovative side arm structure for optimal, secure hold at all times • Ergonomically shaped side arms with grip structure and soft-grip temple ends provide a comfortable, secure fit without pressure • Numerous recesses in the side arms provide increased air circulation for excellent climateoptimised wearer comfort • Nose bridge designed for all-day comfort • Robust polycarbonate lens with uvex's proven supravision coating technology — permanent anti-fog and scratch-resistant lens • UV400 — 100% protection against dangerous UV radiation up to 400 nm • Metal-free Calculation date: 02/2023* 0.11 kg 23
by using recycled material // by using bio-based material uvex i-range sustainable. flexible. safe. The uvex i-range is our new flexible 3in1 safety eyewear range that allows wearers to select the right product for the workplace hazard or environment. uvex i-guard additional protection against liquids, particles and dirt thanks to the highly flexible frame that adapts to any face shape without pressure (marking 3 and 4 in accordance with EN 166) uvex i-guard+ goggles with headband go above and beyond the minimum requirements and boast increased mechanical strength uvex i-lite impressive modern design with flat lens geometry Flat lens design for an unrestricted field of vision Ergonomically shaped side arms for a perfect fit and secure hold without creating pressure points Soft and flexible face seal made from sustainable materials for a universal fit uvex i-guard+ kit can be specifi- cally adjusted to any application thanks to the flexibility to swap the side arms and headband x-tended sideshield for additional side protection Three-stage adjustable side arms for individual customisation With proven uvex supravision coating technology and UV400 protection Made of recycled and bio-based materials to conserve resources and protect the environment 24
9143281 9143295 9143265 9143282 9143296 9143266 9143376 9143297 9143283 9143267 9143377 uvex i-range • Versatile 3in1 safety eyewear range – allows eyewear to be adapted according to workplace hazards • Large, flat lens delivers unrestricted field of vision • x-tended sideshield offers additional protection from hazards • Side arms with multi-incline points allow for a high level of individualisation to ensure a good fit for all facial shapes and head widths • Ergonomically shaped side arms provide a secure fit without pressure • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • UV400 – 100 % protection against dangerous UV radiation up to 400 nm • Metal-free • uvex i-guard: soft, flexible face seal adapts to the wearer providing both protection and comfort. It also protects against droplets or splashes of liquids and large dust particles (markings 3 and 4) • uvex i-guard+: above features together with increased impact protection • uvex i-guard+ kit: interchangeable side arms and headband means eyewear can be worn as either a spectacle or goggle depending on the workplace hazards uvex i-range uvex i-lite uvex i-lite planet uvex i-lite uvex i-guard uvex i-guard planet uvex i-guard Art. no. 9143265 9143295 9143281 9143266 9143296 9143376 Replacement lens 9143255 – – 9143255 – – Version uvex supravision excellence uvex supravision excellence uvex supravision excellence uvex supravision excellence uvex supravision excellence uvex supravision extreme sunglare filter Standard EN 166, EN 170 EN 166, EN 170 EN 166, EN 172 EN 166, EN 170 EN 166, EN 170 EN 166, EN 170 Frame anthracite, blue anthracite, jade anthracite, lime anthracite, blue anthracite, jade anthracite, blue W 166 F CE W 166 F CE W 166 F CE W 166 34 F CE W 166 34 F CE W 166 34 F CE Lens PC clear PC clear (mass balanced) PC grey 23% PC clear PC clear (mass balanced) PC clear UV400 UV400 UV400 UV400 UV400 UV400 2C-1.2 W1 FKN CE 2C-1.2 W1 FKN CE 5-2.5 W1 FKN CE 2C-1.2 W1 FKN CE 2C-1.2 W1 FKN CE 2C-1.2 W1 FKN CE Weight 32 g 32 g 32 g 48 g 48 g 48 g Order quantity multiples 10 PC 10 PC 10 PC 8 PC 8 PC 8 PC uvex i-range uvex i-guard uvex i-guard+ uvex i-guard+ planet uvex i-guard+ uvex i-guard+ uvex i-guard+ kit Art. no. 9143282 9143267 9143297 9143377 9143283 9143300 Replacement lens – 9143255 – – – 9143255 Replacement headband uvex supravision excellence 9143011 9143013 9143011 – 9143011 Version sunglare filter uvex supravision excellence uvex supravision excellence uvex supravision extreme uvex supravision excellence uvex supravision excellence sunglare filter Standard EN 166, EN 172 EN 166, EN 170 EN 166, EN 170 EN 166, EN 170 EN 166, EN 172 EN 166, EN 170 Frame anthracite, lime anthracite, blue anthracite, jade anthracite, blue anthracite, lime anthracite, blue W 166 34 F CE W 166 34 B CE W 166 34 B CE W 166 34 B CE W 166 34 B CE W 166 34 B CE Lens PC grey 23% PC clear PC clear (mass balanced) PC clear PC grey 23% PC clear UV400 UV400 UV400 UV400 UV400 UV400 5-2.5 W1 FKN CE 2C-1.2 W1 BKN CE 2C-1.2 W1 BKN CE 2C-1.2 W1 BKN CE 5-2.5 W1 BKN CE 2C-1.2 W1 BKN CE Weight 48 g 50 g 50 g 50 g 50 g 56 g Order quantity multiples 8 PC 8 PC 8 PC 8 PC 8 PC 8 PC Safety Spectacles uvex i-range ∙ uvex i-range planet uvex i-range planet sustainably manufactured models made from recycled, bio-based material 25
uvex suXXeed strong. sporty. functional. eXXtremely cool look dynamic, attractive frame design eXXcellent vision with proven uvex supravision coating technology and UV400 protection maXXimum comfort ergonomically shaped side arms and soft grip temple ends – now even more comfortable to wear, while still providing a secure hold fleXXible nose pad for a non-slip and pressure-free fit eXXtra protection against particles, dirt and dust is provided by the optional clip-in frame 26
9181180 9181265 9181268 9181288 9181281 Safety Spectacles uvex suXXeed ∙ uvex suXXeed guard uvex suXXeed • Sporty safety spectacle in an appealing, dynamic design • Ergonomically shaped side arms with soft-grip temple ends provide a comfortable, secure fit without pressure • Soft, flexible nose pad adapts to the wearer, delivering a non-slip and pressure-free fit • UV400 – 100% protection against dangerous UV radiation up to 400 nm • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • Optional clip-in frame seal provides extra protection against particles, dirt and dust • Metal-free Accessories: 9181001 Clip-in frame for uvex suXXeed uvex suXXeed clip-in frame Art. no. 9181281 9181288 9181001 Version uvex supravision excellence uvex supravision excellence clip-in frame sunglare filter sunglare filter for uvex suXXeed Standard EN 166, EN 172 EN 166, EN 172 Frame anthracite, lime black, light grey black W 166 FT CE W 166 FT CE Lens PC grey 23% PC grey 23% UV400 UV400 5-2.5 W1 FTKN CE 5-2.5 W1 FTKN CE Weight 28 g 28 g 5 g Order quantity multiples 10 PC 10 PC 20 PC uvex suXXeed uvex suXXeed guard Art. no. 9181265 9181268 9181180 Version uvex supravision excellence uvex supravision excellence uvex supravision excellence incl. clip-in frame Standard EN 166, EN 170 EN 166, EN 170 EN 166, EN 170 Frame anthracite, blue black, light grey anthracite, blue W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC clear PC clear UV400 UV400 UV400 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE Weight 28 g 28 g 33 g Order quantity multiples 10 PC 10 PC 10 PC Calculation date: 11/2023* 0.19kg 27
6 1 2 3 4 5 6 uvex fitting guide Wearing just any safety eyewear is not enough to protect your eyes. If your safety eyewear fits poorly or incorrectly, you're putting yourself at a higher risk of injury. Head and face shapes vary considerably, so it's impossible to find one pair that works for everyone. When trying on new safety eyewear, use this guide and review the eyewear description and materials. Pay attention to: • excellent fit and eye coverage • offers a good field of vision • adjustable to improve fit Checklist Selecting the right model No uncomfortable pressure points on the side of the head or behind the ears. The nose pad is comfortable and lies on your nose without pinching. You should be able to see in all directions without your vision being obstructed. The overall weight of the safety eyewear is distributed evenly. The eyewear fits close to your face without touching your eyelashes. The gap between the eyewear and your face should not exceed 6 to 8 mm. The eyewear stays in place when you move your head forwards or backwards and tilt your head side to side. Choose the model that best suits you and your work. The shape and fit of the eyewear have an impact on the view, the protection and the wearer comfort. wide head shape narrow head shape average head shape Useful tips for making sure that your uvex safety eyewear fits perfectly 28
9183265 9183223 9183064 9183281 Safety Spectacles uvex i-5 · uvex i-5 guard uvex i-5 Art. no. 9183265 9183064 9183223 9183281 Version uvex supravision excellence uvex supravision excellence uvex supravision excellence uvex supravision excellence sunglare filter sunglare filter sunglare filter Standard EN 166, EN 170 EN 166, EN 172 EN 166, EN 172 EN 166, EN 172 Frame anthracite, blue white, black white, black anthracite, lime W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC CBR65 PC CBR23 PC grey 23% UV400 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 5-1.4 W1 FTKN CE 5-2.5 W1 FTKN CE 5-2.5 W1 FTKN CE Weight 29 g 29 g 29 g 29 g Order quantity multiples 10 PC 10 PC 10 PC 10 PC uvex i-5 • Sporty premium quality safety spectacle with a range of adaptive features • x-tended eyeshield: soft seal frame technology wraps around the brow providing protection from particle ingress • x-tended sideshield offers additional protection from hazards • Ergonomically shaped side arms with multi-incline points and length adjustment allow for a high level of individualisation to ensure a good fit for all facial shapes and head widths • Soft-grip temple ends provide a comfortable, secure fit without pressure • Soft, flexible nose pad adapts to the wearer, delivering a non-slip and pressure-free fit • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent antifog and scratch-resistant lens • UV400 – 100% protection against dangerous UV radiation up to 400 nm • Optional clip-in frame seal provides extra protection against particles, dirt and dust • Metal-free Calculation date: 11/2023* 0.19 kg 29
9193080 9193265 9193064 9193280 9193223 9193880 9193376 9193395 Safety Spectacles uvex sportstyle · uvex sportstyle planet uvex sportstyle • Sporty, lightweight safety spectacle with a contoured lens that will fit narrow and wider faces equally well • The combination of soft padding around the brow with ergonomically shaped side arms and soft-grip temple ends provide a comfortable, secure fit without pressure • Soft, adjustable nose pad allows spectacle to be adapted to the wearer to deliver a comfortable, non-slip and pressure-free fit • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • UV400 – 100% protection against dangerous UV radiation up to 400 nm • A sustainable benefit: lenses can be replaced when required uvex sportstyle uvex sportstyle planet Art. no. 9193080 9193265 9193376 9193395 Version uvex supravision plus uvex supravision excellence uvex supravision extreme uvex supravision extreme Standard EN 166, EN 170 EN 166, EN 170 EN 166, EN 170 EN 166, EN 170 Frame black, grey black, lime black, petrol anthracite, jade W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC clear PC clear PC clear (mass balanced) UV400 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE Weight 23 g 23 g 23 g 23 g Order quantity multiples 10 PC 10 PC 10 PC 10 PC uvex sportstyle Art. no. 9193064 9193223 9193280 9193880 Version uvex supravision extreme uvex supravision extreme uvex supravision extreme uvex supravision variomatic sunglare filter sunglare filter sunglare filter self-tinting lenses Standard EN 166, EN 172 EN 166, EN 172 EN 166, EN 172 EN 166, EN 170 Frame white, black white, black white, black black, anthracite W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC CBR65 PC CBR23 PC grey 23% PC light green UV400 UV400 UV400 UV400 5-1.4 W1 FTKN CE 5-2.5 W1 FTKN CE 5-2.5 W1 FTKN CE 2-1.2 W1 FTKN CE Weight 23 g 23 g 23 g 23 g Order quantity multiples 10 PC 10 PC 10 PC PC Calculation date: 01/2023* 0.11 kg 30
9198257 9198237 9198064 Safety Spectacles uvex pheos cx2 · uvex i3 uvex pheos cx2 Art.-Nr. 9198257 9198237 9198064 Version uvex supravision uvex supravision uvex supravision excellence excellence excellence sunglare filter sunglare filter Standard EN 166, EN 170 EN 166, EN 172 EN 166, EN 172 Frame blue, grey white, black white, black W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC grey 23% PC CBR65 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 5-2.5 W 1 FTKN CE 5-1.4 W 1 FTKN CE Weight 28 g 28 g 28 g Order quantity multiples 10 PC 10 PC 10 PC uvex pheos cx2 • Sporty looking safety spectacle with high wearer acceptance • x-tended eyeshield: soft seal frame technology wraps around the brow providing protection from particle ingress • Ergonomically shaped side arms with soft-grip temple ends provide a comfortable, secure fit without pressure • Soft, flexible nose pad adapts to the wearer, delivering a non-slip and pressure-free fit • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • UV400 – 100% protection against dangerous UV radiation up to 400 nm • Metal-free 9190280 9190175 9190281 9190085 uvex i-3 uvex i-3 s Art. no. 9190175 9190281 9190280 9190085 Version uvex supravision plus uvex supravision excellence uvex supravision excellence uvex supravision excellence standard size standard size standard size narrow version sunglare filter contrast-enhancing Standard EN 166, EN 170 EN 166, EN 172 EN 166, EN 170 EN 166, EN 170 Frame black, light grey black, light grey black, light grey anthracite, yellow W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC grey 23% PC clear PC amber UV400 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 5-2.5 W1 FTKN CE 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE Weight 30 g 30 g 30 g 29 g Order quantity multiples 10 PC 10 PC 10 PC 10 PC uvex i-3 • Adjustable, multi-feature premium quality safety spectacle • Side arms with multi-incline points allow for a high level of individualisation to ensure a good fit for all facial shapes and head widths • Soft, adjustable nose pad allows spectacle to be adapted to the wearer to deliver a comfortable, non-slip and pressure-free fit • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • UV400 – 100% protection against dangerous UV radiation up to 400 nm • Available as standard size or narrow version • Metal-free Calculation date: 01/2023* (9190175) 0.26 kg 31
9192225 9192720 9192881 9192285 9192786 9192080 9192385 9192180 9192680 146 mm uvex pheos 138 mm uvex pheos s Safety Spectacles uvex pheos · uvex pheos s uvex pheos uvex pheos s Art. no. 9192080 9192225 9192285 9192385 9192881 9192720 Version uvex supravision plus uvex supravision excellence uvex supravision excellence uvex supravision excellence anti-fog on the inside uvex supravision excellence standard size, standard size standard size, standard size, standard size, small size sunglare filter contrast-enhancing sunglare filter, silver mirror Standard EN 166, EN 170 EN 166, EN 170 EN 166, EN 172 EN 166, EN 170 EN 166, EN 172 EN 166, EN 170 Frame black, grey black, green black, grey black, yellow light grey, grey black, green W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE W 166 FT CE Lens PC clear PC clear PC grey 23% PC amber PC silver mirror grey PC clear UV400 UV400 UV400 UV400 UV400 UV400 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE 5-2.5 W1 FTKN CE 2C-1.2 W1 FTKN CE 5-1.7 W1 FTN CE 2C-1.2 W1 FTKN CE Weight 29 g 29 g 29 g 29 g 29 g 28 g Order quantity multiples 10 PC 10 PC 10 PC 10 PC 10 PC 10 PC uvex pheos s uvex pheos guard uvex pheos s guard Art. no. 9192786 9192180 9192680 Version uvex supravision excellence uvex supravision extreme uvex supravision extreme small size, standard size standard size sunglare filter incl. clip-in frame and headband incl. clip-in frame and headband Standard EN 166, EN 172 EN 166, EN 170 EN 166, EN 170 Frame black, grey black, grey black, grey W 166 FT CE W 166 FT CE W 166 FT CE Lens PC grey 23% PC clear PC clear UV400 UV400 UV400 5-2.5 W1 FTKN CE 2C-1.2 W1 FTKN CE 2C-1.2 W1 FTKN CE Weight 28 g 46 g 45 g Order quantity multiples 10 PC 10 PC 10 PC Accessories Art. no. 9192001 9192002 9958020 Version clip-in frame for clip-in frame for headband for uvex pheos uvex pheos s uvex pheos and standard size narrow version uvex pheos s Colour black black grey, black Order quantity multiples 20 PC 20 PC 10 PC uvex pheos • Sporty, timeless safety spectacle; frameless design allowing for an extra-large field of vision • Ergonomically shaped side arms with soft-grip temple ends provide a comfortable, secure fit without pressure • Nose bridge designed for all-day comfort • Robust polycarbonate lens with uvex’s proven supravision coating technology – permanent anti-fog and scratch-resistant lens • UV400 – 100% protection against dangerous UV radiation up to 400 nm • Optional clip-in frame seal provides extra protection against particles, dirt and dust • Headband option holds eyewear in place during overhead or work in confined spaces • Available as standard size or narrow version • Metal-free Accessories: 9192001 / 9192002 Clip-in frame uvex pheos / uvex pheos s Accessories: 9958020 Headband uvex pheos / uvex pheos s Calculation date: 02/2023* (9192225) 0.18 kg 32
www.uvex-safety.co.ukRkJQdWJsaXNoZXIy MTkwNjYzOQ==